Chapter 52: LACP Commands
SHOW LACP SYS-ID
764
Syntax
show lacp sys-id
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the LACP priority value and MAC address of
the switch. Figure 147 provides an example of the display.
System Priority: 0x0080 (32768)
Mac Address: EC-CD-6D-1E-52-28
Figure 147. SHOW LACP SYS-ID Command
Note
The LACP priority value is set as an integer with "LACP SYSTEM-
PRIORITY" on page 756 and displayed in hexadecimal format by
this command.
Example
This example displays the LACP priority value and MAC address:
awplus# show lacp sys-id