SHOW ESTACK REMOTELIST
numOfNodes 2
Num
Mac Address
-------------------------------------------------------------------------
01
eccd.6d4d.6dd5
02
eccd.6d4d.6dd0
Syntax
show estack remotelist [name] [series]
Parameters
name
Sorts the list of switches by the host name.
series
Sorts the list of switches by the model name.
Mode
Privileged Exec mode
Description
Use this command on the command switch to display the member
switches of an enhanced stack. You may sort the names by MAC address,
host name, or model series. The default is MAC address. An example is
shown in Figure 100.
Name
dutC
dutB
Figure 100. SHOW ESTACK REMOTELIST Command
The list does not include the command switch on which you entered the
command.
Note
This command only works on the command switch of the stack. It
does not work on member switches.
Examples
This example displays the member switches of an enhanced stack by
MAC address:
awplus> enable
awplus# show estack remotelist
AT-8100 Switch Command Line User's Guide
Mode
Version
Member AWPLUS v2.2.5.0 AT-8100S/24
Member AWPLUS v2.2.5.0 AT-8100S/24C
Model
443