Clock Set - Allied Telesis AT-8100L/8 User Manual

Chapter 8: Basic Switch Management Commands

CLOCK SET

146
Syntax
hh:mm:ss dd mmm yyyy
clock set
Parameters
hh:mm:ss
Specifies the hour, minute, and second for the switch's time in 24-
hour format.
dd
Specifies the day of the month.
mmm
Specifies the month. The month is specified by its first three letters.
For example, June is Jun. The first letter must be uppercase and
the second and third letters lowercase.
year
Specifies the year. The year must be specified in four digits (for
example, 2011 or 2012).
Mode
Privileged Exec mode
Confirmation Command
"SHOW CLOCK" on page 163
Description
Use this command to manually set the date and the time on the switch.
The command must include both the date and the time.
Note
When set manually the date and time are not retained by the switch
when it is reset or powered off.
Example
This example sets the time and date to 2:15 pm, April 7, 2011:
awplus> enable
awplus# clock set 14:15:0 7 Apr 2011