Table 2. Alliedware Plus Modes - Allied Telesis AT-8100L/8 User Manual

Chapter 1: AlliedWare Plus Command Line Interface
Mode
User Exec mode
Privileged Exec mode
Global Configuration mode
Class-map mode
54
Note
By default, the mode prompts are prefixed with the "awplus" string.
To change this string, use the HOSTNAME command. See "What to
Configure First" on page 74.

Table 2. AlliedWare Plus Modes

Prompt
awplus>
awplus#
awplus (config)#
awplus (config-cmap)#
Function
 Displays the switch settings.
 Lists the files in the file system.
 Pings remote systems.

Displays the switch settings.

Lists the files in the file system.

Pings remote systems.

Sets the date and time.

Saves the current configuration.

Downloads new versions of the
management software.
 Restores the default settings.
 Renames files in the file system.
 Resets the switch.
 Creates classifiers and access
control lists.
 Creates encryption keys for remote
HTTPS and SSH management.
 Activates and deactivates 802.1x
port-based network access control.
 Assigns a name to the switch.
 Configures IGMP snooping.
 Sets the MAC address table aging
timer.
 Enters static MAC addresses.

Specifies the IP address of an
SNTP server.
 Configures the RADIUS client.
 Sets the console timer.
 Creates classifiers and flow groups
for Quality of Service policies.