Delete Force; Table 56. File System Commands - Allied Telesis AT-8100L/8 User Manual

Chapter 35: File System Commands

DELETE FORCE

548
Syntax
filename.ext
delete force
Parameter
filename.ext
Specifies the name of the boot configuration file to be deleted. You
can use the wildcard "*" to replace any part of a filename to delete
multiple configuration files.
Mode
Privileged Exec mode
Description
Use this command to delete boot configuration files from the file system in
the switch. This command is equivalent to "DELETE" on page 547.
Note
If you delete the active configuration file, the switch recreates it the
next time you issue the WRITE command or the COPY RUNNING-
CONFIG STARTUP-CONFIG command. To view the name of the
active boot configuration file on the switch, refer to "SHOW BOOT"
on page 566.
To view a list of the files in the file system, refer to "DIR" on page 549.
Examples
This command deletes the boot configuration file "production_sw.cfg":
awplus# delete force production_sw.cfg
This command deletes all boot configuration files that start with "unit":
awplus# delete force unit*.cfg