Table 39. Show Stack Command - Allied Telesis AT-8100L/8 User Manual

Stacking summary Information:
ID MACADDRESS
1 00:00:54:55:56:42
2 00:00:54:55:78:11
3 00:00:54:55:12:09
4 00:00:54:55:56:42
Operational status
Master Module ID:
Stack MAC Address:
Local Module ID:
Local MAC Address:
The table in Figure 94 lists the switches in the stack. The columns in the
table are defined in Table 39.
Column
ID
MAC Address
SwVer
Model
Status
Role
The Operational status field displays the topology of the stacking ports.
The field displays "Ring topology is broken" for the duplex-chain topology
and "Normal operation" for the duplex-ring topology. For more information,
refer to "Stacking Port Topologies" on page 392.
The master module ID and stack MAC address fields display the ID
number and MAC address of the master switch. The local MAC module ID
and MAC address fields display the same information for the switch from
which you are managing the stack. In most situations, the master and local
fields display the same information because a stack should always be
managed through the master switch.
SwVer Model
2.2.1.3 AT-8100S/24
2.2.1.3 AT-8100S/24C
2.2.1.3 AT-8100S/24
2.2.1.3 AT-8100S/48
Ring topology is broken
1
00:00:54:55:56:42
1
00:00:54:55:56:42
Figure 94. SHOW STACK Command on an Active Stack

Table 39. SHOW STACK Command

The stack ID number of the switch.
The MAC address of the switch.
The version number of the management
software.
The model name of the switch.
The current status of the switch.
The stacking role of the switch, which can be
master or member.
AT-8100 Switch Command Line User's Guide
Status Role
Ready Master
Ready Member
Ready Member
Ready Member
Definition
401