Shutdown - Allied Telesis AT-8100L/8 User Manual

Chapter 10: Port Parameter Commands

SHUTDOWN

Syntax
shutdown
Parameter
None
Mode
Port Interface mode
Description
Use this command to disable ports. Ports that are disabled do not forward
traffic. You might disable ports that are unused to secure them from
unauthorized use or that are having problems with network cables or their
link partners. The default setting for the ports is enabled.
To reactivate a port, refer to "NO SHUTDOWN" on page 218.
Confirmation Command
"SHOW INTERFACE" on page 228
Example
This example disables ports 15 and 16:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.15,port1.0.16
awplus(config-if)# shutdown
244