Show Stack - Allied Telesis AT-8100L/8 User Manual

Chapter 22: Stacking Commands

SHOW STACK

Stacking summary Information:
ID MACADDRESS
1 eec5.611d.6a54
2 eccd.6d4b.2492
3 0015.7700.010e
4 00a0.d299.aabb
5 eccd.6d1e.56c6
6 0000.0000.0101
7 eccd.6d1e.17cc
Operational status: Ring topology is broken
Master Module ID: 1
Stack MAC Address: eec5.611d.6a54
Local Module ID: 1
Local MAC Address: eec5.611d.6a54
404
Syntax
show stack
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the stack ID numbers, MAC addresses, and
other information of the switches in a stack. The information the command
displays depends on whether the switch is acting as a stand-alone unit or
as part of a stack. For further information, refer to "Displaying the Switches
of a Stack" on page 400.
Figure 95 is an example of the information the command displays.
SwVer
2.2.5.0
2.2.5.0
2.2.5.0
2.2.5.0
2.2.5.0
2.2.5.0
2.2.5.0
Figure 95. SHOW STACK Command
Example
The following example displays the stack ID numbers and MAC addresses
of the switches in a stack:
awplus> enable
awplus# show stack
Model
AT-8100S/24C
AT-8100S/24F-LC
AT-8100S/16F8-SC
AT-8100S/24F-LC
AT-8100S/48
AT-8100S/16F8-SC
AT-8100S/24POE
Status Role
Ready Master
Ready Member
Ready Member
Ready Member
Ready Member
Ready Member
Ready Member