Show Ip Source Binding; Table 77. Show Ip Dhcp Source Binding Command Parameters - Allied Telesis AT-8100L/8 User Manual

Chapter 44: DHCP Snooping Commands

SHOW IP SOURCE BINDING

awplus# show ip dhcp source binding
IP Source Bindings:
Client
IP Address
---------------------------------------------------------------------------
1.1.1.1
674
Syntax
show ip source binding
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display static entries in the DHCP snooping
database. The static entries have been added with the IP SOURCE
BINDING command. See "IP SOURCE BINDING" on page 658
Example
This example displays static entries in the DHCP snooping database:
awplus> enable
awplus# show ip source binding
See Figure 132 for a sample of this display. See Table 77 on page 674 for
an explanation of the parameters in this display.
MAC
Address
0000.1111.2222
Figure 132. SHOW IP DHCP SOURCE BINDING Command

Table 77. SHOW IP DHCP SOURCE BINDING Command Parameters

Parameter
Client IP Address
MAC Address
VLAN Port
1 port1.0.21
Specifies the IP address of the DHCP client.
Specifies the MAC address of the DHCP
client.
Expires
(sec) Type
Infinite Static
Description