Default Log Buffered - Allied Telesis AT-AR3050S Command Reference Manual

L C
OGGING OMMANDS

DEFAULT LOG BUFFERED

default log buffered
Overview This command restores the default settings for the buffered log stored in RAM. By
default the size of the buffered log is 50 kB and it accepts messages with the
severity level of "warnings" and above.
default log buffered
Syntax
Default The buffered log is enabled by default.
Mode Global Configuration
Example To restore the buffered log to its default settings use the following commands:
awplus#
awplus(config)#
Validation show log config
Commands
Related log buffered
Commands
log buffered size
C613-50077-01 REV A
configure terminal
default log buffered
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
309