Storm-Control - Allied Telesis AT-8100L/8 User Manual

Fast ethernet switches at-8100 series management software command line interface user’s guide alliedware plus version 2.2.5
Hide thumbs Also See for AT-8100L/8:
Table of Contents

Advertisement

Chapter 10: Port Parameter Commands

STORM-CONTROL

248
Syntax
storm-control broadcast|multicast|dlf level
Parameters
broadcast
Specifies broadcast packets.
multicast
Specifies multicast packets.
dlf
Specifies unknown unicast packets.
level
Specifies the maximum number of ingress packets per second of
the designated type the port will forward. The range is 0 to
33,554,431 packets.
Mode
Port Interface mode
Description
Use this command to set maximum thresholds for the ingress packets on
the ports. Ingress packets that exceed the thresholds are discarded by the
ports. Thresholds can be set independently for broadcast packets,
multicast packets, and unknown unicast packets. To view the current
thresholds of the ports, refer to "SHOW RUNNING-CONFIG" on
page 164.
To remove threshold levels from the ports, refer to "NO STORM-
CONTROL" on page 220.
Confirmation Commands
"SHOW STORM-CONTROL" on page 240
"SHOW RUNNING-CONFIG" on page 164
value

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents