Show Power-Inline Interface - Allied Telesis AT-8100L/8 User Manual

SHOW POWER-INLINE INTERFACE

Interface Admin
port1.0.1 Disabled Low
port1.0.2 Enabled
port1.0.3 Enabled
port1.0.4 Disabled Low
Syntax
show power-inline interface
Parameter
port
Specifies a port. You can display more than one port at a time.
Mode
Privileged Exec mode
Description
Use this command to display the PoE information on the ports. An
example is shown in Figure 66.
Pri Oper
Disabled 0
High Powered 3840
Crit Powered 6720
Disabled 0
Figure 66. SHOW POWER-INLINE INTERFACE Command
This command displays a subset of the information the SHOW POWER-
INLINE command displays. The fields are described in Table 24 on
page 283.
Example
This example displays PoE information for ports 1 to 4:
awplus# show power-inline interface port1.0.1-port1.0.4
AT-8100 Switch Command Line User's Guide
port
Power Device Class Max(mW)
0
Phone 1
AccessPt 2
0
15400 [C]
5000 [U]
7000 [C]
15400 [C]
287