Chapter 10: Port Parameter Commands
SHOW STORM-CONTROL
240
Syntax
show storm-control [
Parameters
port
Specifies the port whose storm-control, threshold limit settings you
want to view. You can specify more than one port at a time. To
display all the ports, do not include this parameter.
Mode
Privileged Exec mode
Description
Use this command to display information about the threshold limit settings
on the ports. Figure 58 shows an example of the information when you
enter the following command:
awplus# show storm-control port1.0.15
Port
BcastLevel
Port1.0.15 30100
Figure 58. SHOW STORM-CONTROL Command
See Table 17 for a description of the table headings.
Table 17. SHOW STORM-CONTROL Command
Column
Port
Indicates the port number.
BcastLevel
Indicates the maximum number of ingress broadcast
packets per second for the port. Broadcast packets
beyond this number are discarded.
McastLevel
Indicates the maximum number of ingress multicast
packets per second for the port. Multicast packets
beyond this number are discarded.
port
]
Mcastlevel
Dlflevel
100
Description