Chapter 2: Installation tasks
Factory defaults
© Copyright IBM Corp. 2005
This chapter describes tasks to install, configure, and verify operation
of the SAN32M-1 switch and rack-mount Enterprise Fabric
Connectivity (EFC) Server. The switch can be installed on a table or
desk top, mounted in an equipment cabinet, or mounted in any
standard equipment rack.
Table 4
lists the factory-set defaults for the SAN32M-1 switch.
Factory-Set defaults (switch)
Table 4
Item
Customer password
Maintenance password
IP address
Subnet mask
Gateway address
Factory-Set defaults (management server)
Table 5
Item
Liquid crystal display (LCD) front panel
Windows 2000 operating system user name (case sensitive)
Windows 2000 operating system password (case sensitive)
SAN management application
sensitive)
SAN management application password (case sensitive)
LAN 1 (public interface)
Default
password
level-2
10.1.1.10
255.0.0.0
0.0.0.0
Default
9999
Administrator
password
user name (case
Administrator
password
IP Address
192.168.0.1
Subnet mask
255.0.0.0
Gateway address
0.0.0.0
51