IBM TotalStorage SAN32M-1 Installation And Service Manual page 407

Hide thumbs Also See for TotalStorage SAN32M-1:
Table of Contents

Advertisement

Message
Cannot have spaces in field.
Description
Spaces are not allowed in this field.
Action
Remove the spaces or retype the field without spaces.
Message
Cannot install firmware to a switch with a failed CTP card.
Description
Firmware cannot be installed on a switch with a defective CTP card.
Action
Replace the failed CTP card and retry the firmware install to the
switch.
Message
Cannot perform this operation while the switch is offline.
Description
This operation cannot take place while the switch is offline.
Action
Configure the switch offline through the Set Online State dialog box
then retry the operation.
Message
Cannot remove all slot assignments from Partition 0.
Description
The user has attempted to remove all slots from Partition 0, which
would leave the partition disabled. The director firmware requires
that Partition 0 be enabled.
Action
Do not attempt to remove slots from Partition 0.
Message
Cannot retrieve current SNMP configuration.
Description
The current SNMP configuration cannot be retrieved. The link is
down or busy.
Appendix A: Messages
375

Advertisement

Table of Contents
loading

Table of Contents