Table of Contents
Advertisement
Task 13: Configure the switch to the management application
Figure 60
To manage a new switch, it must be identified to and discovered by
the SAN management application. To identify the new switch:
1. At the SAN management application (SANavigator or EFCM
main window), select the Setup option from the Discover menu.
The Discover Setup dialog box displays
Discover setup dialog box
2. Click Add. The Domain Information dialog box displays with the
IP Address page open by default
(Figure
60).
(Figure 61
on page 102).
Chapter 2: Installation tasks
101
Advertisement
Table of Contents
