Table of Contents
Advertisement
EFCM Basic logs
304
SAN32M-1 Installation and Service Manual
•
Old Exit Port - The switch port number (decimal) used for
transmitting Fibre Channel traffic before the re-route action.
•
New Exit Port - The switch port number (decimal) used for
transmitting Fibre Channel traffic after the re-route action.
To open an EFCM Basic log, click the Logs tab at the Monitor panel.
The Monitor panel opens with the Logs page displayed.
The Logs tab provides links to the following logs:
•
Event Log - A listing of messages generated by the product
regarding errors and events. The four levels of events indicate an
increasing level of severity, from Informational to Severe.
•
Open Trunking Re-Route Log - A log of open trunking re-route
actions made by the product.
•
Link Incident Log - A log of link incidents that have occurred.
Security Log - List of security incidents that have occurred.
•
Audit Log - List of events tracked for auditing purposes.
•
Fabric Log - List of events associated with the Fabric.
•
Embedded Port Frame Log - List of cumulative events.
•
All Logs - collects the information for each log into a single text
page.
NOTE: For details on the logs, review the EFCM Basic User Manual.
Each log contains a link that brings the user to a page of ASCII text
that reflects the log information present on the machine at that
moment. The log displayed is a snapshot of the current log
information. Log entries are displayed in the order in which they
occurred, with most recent entries listed first. Each log also contains a
Clear Log button that is used to clear all the entries in the log.
At the Logs page:
•
Select (double-click) a log title to open and view the contents of
the associated log, or
•
Select (double-click) the All Logs title to open and simultaneously
view the contents of all logs.
Advertisement
Table of Contents
