Table of Contents
Advertisement
1
2
Figure 6
SFP transceivers
20
SAN32M-1 Installation and Service Manual
3
4
Switch (rear view)
Location
Description
1
Fan module
2
AC IN 1 power receptacle
3
Power switch
4
Fan modules
5
AC IN 0 power receptacle
6
Power switch
A singlemode or multimode fiber-optic cable attaches to a port
through a pluggable small form factor (SFP) transceiver. The SFP
provides a duplex LC
switch port for easy replacement. The following fiber-optic
transceiver types are available:
NOTE: All of the following transceiver types can be used in either the 1 Gbps
or 2 Gbps switches, however a 1 Gbps transceiver used in a 2 Gbps switch
will limit that port to a 1 Gbps data rate.
•
Shortwave laser (1.0625 Gbps) - Shortwave laser transceivers
provide connections for transferring 1.0625 Gbps data over short
distances as follows:
— Up to 500 meters through 50-micron multimode fiber.
— Up to 300 meters through 62.5-micron multimode fiber.
5
6
®
interface, and can be detached from the
Advertisement
Table of Contents
