Table of Contents
Advertisement
154
SAN32M-1 Installation and Service Manual
operating environment in case of hard drive failure. The EfcData
directory contains:
•
SAN management configuration data (switch definitions, user
names and passwords, switch date and time, port configurations,
operating parameters, SNMP recipients, and e-mail recipients).
•
Log files (SAN management application logs and IBM
TotalStorage SAN32M-1 switch element manager application
logs).
•
Switch firmware versions stored in the firmware library.
•
Call-home configuration data.
•
Configuration data for the switch is stored in nonvolatile random
access memory (NV-RAM) on the switch's CTP card, and is
backed up through the element manager application. The data is
recorded in the EfcData directory when a backup is performed.
The server does not back up Windows 2000 operating system data,
such as user names, passwords, date and time, and TCP/IP network
information. This information was recorded while performing
installation tasks, and verified while performing
verify management server restore information
To back up management server configuration data and create a base
EfcData restore CD:
1. Insert a blank rewritable CD into the CD-RW drive and format
the CD.
a. At the Windows 2000 desktop, locate the InCD icon at the
right side of the task bar.
b. Right click the icon and select Format (F). The first window of
the InCD wizard displays.
c. Click Next to proceed to the second window of the InCD
wizard. Use the default parametersdisplayed at each window,
and click Next and Finish as appropriate to complete the CD
formatting task.
d. When the rewritable CD is formatted, the red down arrow
associated with the InCD icon changes to a green up arrow.
2. Back up the switch configuration file to the management server.
Task 14: Record or
on page 103.
Advertisement
Table of Contents
