202
SAN32M-1 Installation and Service Manual
3. Return to the View panel (Port Properties tab).
Continue.
47
At the View panel, does the Operational State field display a
Segmented message?
NO
YES
↓
Port segmentation is indicated. Go to
codes. If no event codes are found, go to
ISL, and segmented port problem determination
page 267.
48
At the View panel, does the Operational State field display a message
indicating a link incident or port problem?
NO
YES
↓
A port problem is indicated. Go to
codes. If no event codes are found, go to
failure and link incident analysis
49
Repeat
step 45
through
Is a link incident or port problem indicated for any of the ports?
NO
YES
↓
A link incident problem or port SFP failure is indicated. Go to
step 52
to obtain event codes. If no event codes are found,
go to
MAP 0600: port failure and link incident analysis
page 247.
50
Inspect the power supply operational states.
a. At the View panel, click the Component Properties tab. The View
panel (Component Properties tab) displays.
b. Inspect the State fields for both power supplies.
Does the State field display a Failed message for either power
supply?
NO
YES
step 52
step 52
on page 247.
step 48
for each remaining port.
to obtain event
MAP 0700: fabric,
on
to obtain event
MAP 0600: port
on