Table of Contents
Advertisement
Enabling and configuring open trunking
Figure 72
120
SAN32M-1 Installation and Service Manual
Candidate links for rerouting flow are identified and maintained
automatically. This means that flow may be rerouted onto a link that
goes to a different adjacent switch, as long as that link is on the least
cost/shortest path to the destination domain ID.
To install and enable this option, select the Configure Feature Key
option under the element manager's Configure menu. Refer to
Configure PFE Key (optional)
To enable Open Trunking for a specific switch and configure
threshold values and event notification options, use the following
steps.
1. Select Open Trunking from the Configure menu on the menu bar.
The Configure Open Trunking dialog box displays.
Configure open trunking dialog box
2. Enable Open Trunking by clicking the Enable Open Trunking check
box to display a check mark.
on page 106.
Task 16:
Advertisement
Table of Contents
