Table of Contents
Advertisement
Task 14: Record or verify management server restore information
Configuration information must be recorded to restore the
management server in case of hard drive failure. Refer to
C, Restore EFC servers
for instructions. To record or verify
management server configuration information:
1. Verify network configuration information is recorded. The
information was recorded while performing
management server password and network addresses
Task 8: Configure management server information
a. Verify the default LCD panel password (9999) or changed
password is recorded.
b. Verify default or changed network addresses are recorded for
the private LAN connection (LAN 2):
• IP address - default is 10.1.1.1.
• Subnet mask - default is 255.0.0.0.
• Gateway address - default is blank.
• DNS server IP address - default is blank.
c. Verify default or changed network addresses are recorded for
the public LAN connection (LAN 1):
• IP address - default is 192.168.0.1.
• Subnet mask - default is 255.0.0.0.
• Gateway address - default is blank.
• DNS server IP address - default is blank.
d. Verify the default computer name (EFCSERVER) or changed
computer name is recorded.
2. Verify user passwords and other information are recorded. The
information was recorded while performing
Windows 2000 users
3. Verify date and time information is recorded. The information
was recorded while performing
and time
on page 94.
a. Verify the time zone is recorded.
on page 88.
Task 10: Set management server date
Chapter 2: Installation tasks
Appendix
Task 7: Configure
on page 75 and
on page 80.
Task 9: Configure
103
Advertisement
Table of Contents
