Table of Contents
Advertisement
EFCM Basic interface
Maintenance approach
14
SAN32M-1 Installation and Service Manual
The EFCM Basic interface provides a GUI accessed through the
Internet (locally or remotely) to manage, monitor, and isolate
problems for the Switch. When the interface opens, the default
display is the View panel.
Task selection tabs appear at the top of the panel, a graphical
representation of the switch hardware (front and rear) appears at the
right side of the panel, and menu selections (View, Configure, Monitor,
Operations, and Help) appear at the left side of the panel. The task
selection tabs allow personnel to perform switch-specific tasks, and
are a function of the menu selected as follows:
•
View - At the View panel, the Switch (default), Port Properties, FRU
Properties, Unit Properties, Operating Parameters, and Fabric task
selection tabs appear.
•
Configure - At the Configure panel, the Ports (default), Switch,
Management, Zoning, Security, and Performance task selection tabs
appear.
•
Monitor - At the Monitor panel, the Port List (default), Port Stats,
Log, and Node List task selection tabs appear.
•
Operations - At the Operations panel, the Switch (default), Port,
Maintenance, and Feature Installation task selection tabs appear.
•
Help - The Help selection opens online user documentation that
supports the EFCM Basic interface.
Whenever possible, the maintenance approach instructs service
personnel to perform fault isolation and repair procedures without
degrading or interrupting operation of the switch, attached devices,
or associated applications. Switch fault isolation begins when one or
more of the following occur:
•
System event information displays at the attached management
server, a remote workstation communicating with the
management server, or the EFCM Basic interface.
•
LEDs on the switch front panel or FRUs illuminate to indicate a
hardware malfunction.
Advertisement
Table of Contents
