Table of Contents
Advertisement
MAP 0000: Start MAP
Event Codes versus maintenance action (Continued)
Table 11
Event
Explanation
Code
584
Not operational primitive sequence (NOS) received.
585
Primitive sequence timeout.
586
Invalid primitive sequence received for link state.
602
SBAR module anomaly detected.
604
SBAR module failure.
605
SBAR module revision not supported.
800
High-temperature warning (port module thermal
sensor).
801
Critically hot temperature warning (port module thermal
sensor).
802
Port module shutdown due to thermal violations.
805
High-temperature warning (SBAR module thermal
sensor).
806
Critically hot temperature warning (SBAR module
thermal sensor).
807
SBAR module shutdown due to thermal violations.
810
High-temperature warning (CTP thermal sensor).
811
Critically hot temperature warning (CTP thermal
sensor).
812
CTP shutdown due to thermal violations.
850
System shutdown due to CTP thermal violations.
This MAP describes initial fault isolation for the switch. Fault
isolation begins at the Enterprise Fabric Connectivity (EFC) Server,
failed switch, or Internet-connected personal computer (PC) running
the EFCM Basic interface.
Action
Go to
MAP
0600.
Go to
MAP
0600.
Go to
MAP
0600.
No action required.
Go to
MAP
0600.
Go to
MAP
0600.
Go to
MAP
0500.
Go to
MAP
0500.
Go to
MAP
0500.
Go to
MAP
0500.
Go to
MAP
0500.
Go to
MAP
0500.
Go to
MAP
0500.
Go to
MAP
0500.
Go to
MAP
0500.
Go to
MAP
0500.
Chapter 3: Diagnostics
183
Advertisement
Table of Contents
