Table of Contents
Advertisement
Description
Action
Message
Description
Action
Message
Description
Action
Message
Description
Action
Message
Description
Action
Message
Description
390
SAN32M-1 Installation and Service Manual
Network address specified is not known by the domain name server.
Check the input address and specify the correct network address.
Invalid port address.
Invalid port address has been entered.
Verify port address through the Configure Addresses - "Active" dialog
box (FICON mode only) and re-enter.
Invalid port number.
Port number must be within the range of ports for the specific switch
model.
Enter a port number within the correct range.
Invalid port number. Valid ports are (0 - 31).
Port number must be within the range of ports for the specific switch
model. For this model, the valid port numbers are 0 - 31.
Enter a port number within the correct range.
Invalid port swap.
Port swap selection is not allowed.
Ensure that each port selected for swap has not been previously
swapped.
Invalid response received from switch.
The switch returned an invalid response.
Advertisement
Table of Contents
