Table of Contents
Advertisement
Enable CLI
Figure 104
Enable or disable host control
2. Click OK to save and activate changes.
Perform this procedure to toggle (enable or disable) the state of the
product's command line interface. To change the CLI state:
1. Select CLI from the Configure menu at any view. The CLI View
displays
(Figure
104).
CLI View
2. Perform one of the following:
• Click Enable to activate the CLI.
• Click Disable to deactivate the CLI.
3. Click (check) the Use SSH check box to enable secure shell (SSH)
protocol. The protocol controls CLI access to the product and
provides software-enforced encryption.
4. Click OK to save and activate changes.
Perform this procedure to configure the open systems management
server and enable OSI host control of the product. Implementing and
enabling OSI host control requires installation of a SAN management
application on the OSI server. Applications include Veritas
SANPoint™ Control or Tivoli
host control:
®
®
NetView
. To enable or disable OSMS
Chapter 2: Installation tasks
®
169
Advertisement
Table of Contents
