New threshold alerts dialog box - third screen
Figure 90
10. Either select Port Type or Port List.
• If you select Port Type, selecting either E_Ports or F_Ports will
cause this alert to generate for all ports configured as E_Ports
or F_Ports respectively.
• If you select Port List, you can select individual ports by
clicking the check box by each port number or set all ports.
Selecting Set All Ports places a check mark by each port
number. Selecting Clear All Ports will clear the check marks by
each port number.
11. Click Next.
A final screen appears to provide a summary of your alert
configuration. To make any changes, backwards and forwards
through the configuration screens by selecting the Previous and
Next buttons.
Chapter 2: Installation tasks
149