Table of Contents
Advertisement
.
Figure 170
Zone sets view
Zone members appear as:
•
The unique 16-digit WWN identifying the device attached to the
port. If a nickname is configured, the nickname appears instead.
For example:
10:00:0206:77:43:B0:1C
•
A unique domain ID (1 through 31 inclusive) and port number (0
through 31). For example:
Domain 1, Port 7
The information is also useful for fault isolating E_Port segmentation
problems caused by incompatible zone sets. When forming a
multiswitch fabric by connecting switches with active zone sets, zone
names within the active zone sets should not be duplicated. Names
can be duplicated only if the member WWNs of each zone are
identical. If two switches have a zone name conflict (duplicate zone
names exist), the zone sets cannot merge, the connecting E_Port at
each switch segments to prevent the creation of an ISL, and the
switches do not form a multiswitch fabric.
Chapter 4: Repair information
311
Advertisement
Table of Contents
