Table of Contents
Advertisement
a. Work with the system administrator to determine the desired
zone name change for the one of the affected switches.Zone
names must conform to the following rules:
•
The name must be 64 characters or fewer in length.
•
The first character must be a letter (a through z), upper or
lower case.
•
Other characters are alphanumeric (a through z or 0 through
9), dollar sign ($), hyphen (-), caret (^), or underscore (_).
b. Close the Element Manager application for the switch (Hardware
View). The main EFC Manager window, or Product View (still
active) displays.
c. Select the Fabrics tab from the View menu. The Fabrics View
displays with the default Topology tab active.
d. Select the Zone Set tab at the bottom of the window. The Zone
Set tab becomes active and displays the active zone set.
Active zone set view
Figure 153
Chapter 3: Diagnostics
275
Advertisement
Table of Contents
