Table of Contents
Advertisement
Configure Password
Figure 22
Figure 23
Figure 24
76
SAN32M-1 Installation and Service Manual
To configure a new LCD panel password:
1. At the management server's LCD panel, press ENTER. The
Welcome!! or operational information message changes to the
following
(Figure
22):
Input Password:
0****
LCD panel (password entry)
2. Using the
button to increment a digit, the
decrement a digit, the
and the
button to move the cursor right, input the default
password (9999), and press ENTER. The LAN 1 Setting??
message appears at the LCD panel.
3. Press the
button several times until the Change Password?
option appears at the LCD panel, then press ENTER. The
following message appears
New Password:
0****
LCD panel (new password)
4. Use the arrow keys as described in
numeric password, then press ENTER. The following message
appears
(Figure
24):
Save Change?
Yes, Save !!
LCD panel (save change)
5. Press ENTER. A Wait a moment! message appears at the LCD
panel, the LCD panel returns to the LAN 1 Setting?? message,
and the password changes.
button to
button to move the cursor left,
(Figure
23):
step 2
to input a new 4-digit
Advertisement
Table of Contents
