3. Press ENTER and the following message appears
the default IP address of 192.168.0.1.
Input IP:
192.168.000.001
LCD panel (LAN 1 IP address)
Figure 31
4. Use the arrow keys as described in
address, then press ENTER. The following message appears
(Figure
Save Change?
Yes, Save !!
LCD panel (save change)
Figure 32
5. Press ENTER. The LAN 1 IP address changes and the following
message appears
255.0.0.0.
Input Netmask:
255.000.000.000
LCD Panel (LAN 1 subnet mask)
Figure 33
6. Use the arrow keys as described in
mask, then press ENTER. The following message appears
(Figure
Save Change?
Yes, Save !!
LCD panel (save change)
Figure 34
7. Press ENTER. A Wait a moment! message appears at the LCD
panel, the LCD panel returns to the LAN 1 Setting?? message,
and the LAN 1 subnet mask changes.
32):
(Figure
33) with the default subnet mask of
34):
(Figure
31) with
step 2
to input a new IP
step 2
to input a new subnet
Chapter 2: Installation tasks
79