Table of Contents
Advertisement
Node list view
Figure 169
•
Position-a number representing the FRU chassis position. The
chassis (slot) position for a nonredundant FRU is 0. The chassis
positions for redundant FRUs are 0 and 1. The chassis positions
for UPM cards are 0 through 15 inclusive.
•
Status-the FRU status (Active or Backup).
•
Part Number-the FRU part number.
•
Serial Number-the FRU serial number.
The Node List View
(Figure
attached to the switch through node ports (N_Ports). The information
is useful to maintenance personnel for fault isolation and repair
verification.
To open the Node List View, select Node List from the View menu on the
navigation control panel.
Node list view
The Node List View contains the following columns:
•
Port # - the port number (0 through 31). Only ports attached to a
device are displayed.
•
Addr - the switch logical port address (05 through 43 inclusive) in
hexadecimal format.
•
Node Type - the type of attached device. This information is
supplied by the device (if supported). Node types include:
169) displays information about all devices
Chapter 4: Repair information
309
Advertisement
Table of Contents
