Table of Contents
Advertisement
Figure 28
Figure 29
Configure public LAN Addresses (optional)
Figure 30
78
SAN32M-1 Installation and Service Manual
Input Netmask:
255.000.000.000
LCD panel (LAN 2 subnet mask)
6. Use the arrow keys as described in
mask, then press ENTER. The following message appears
(Figure
29):
Save Change?
Yes, Save !!
LCD panel (save change)
7. Press ENTER. A Wait a moment! message appears at the LCD
panel, the LCD panel returns to the LAN 1 Setting?? message,
and the LAN 2 subnet mask changes.
8. Record the private LAN IP address and subnet mask for reference
if the management server hard drive fails and must be restored.
To optionally configure TCP/IP network information for the public
LAN connection (LAN 1):
1. At the management server's LCD panel, press ENTER. The
Welcome!! or operational information message changes to the
following
(Figure
30):
Input Password:
0****
LCD panel (password entry)
2. Using the
button to increment a digit, the
decrement a digit, the
and the
button to move the cursor right, input the default or
changed password, and press ENTER. The LAN 1 Setting??
message appears at the LCD panel.
step 2
to input a new subnet
button to
button to move the cursor left,
Advertisement
Table of Contents
