Restore Factory Defaults Option; Reset Appliance Option; Enable Ldap Debug Messages Option; Exit Option - IBM 1735-2GX Installation And User Manual

3. Enter yes at the prompt. A password configuration window appears.
4. Enter the password as prompted.

Restore Factory Defaults option

Selecting the Restore Factory Defaults option allows you to restore all appliance default settings.
To restore factory default configuration using the Console Menu, complete the following
steps:
1. Bring up the Console Main menu.
2. Type 6 and press Enter.
3. Enter yes at the prompt. The default appliance configuration settings are restored.

Reset Appliance option

Selecting the Reset Appliance option allows you to initiate a soft reset of the appliance.
To reset the appliance using the Console Menu, complete the following steps:
1. Bring up the Console Main menu.
2. Type 7 and press Enter.
3. Enter yes at the prompt. The appliance is reset.

Enable LDAP Debug Messages option

Selecting the Enable LDAP Debug Messages option turns on the display of LDAP debug messages.
To display LDAP debug messages using the Console Menu, complete the following steps:
1. Bring up the Console Main menu.
2. Type 8 and press Enter.
3. When you are finished viewing the messages, press any key to exit this mode.

Exit option

Selecting the Exit menu option returns you to the ready prompt.
To exit the Console Menu, perform the following step:
Type 0 (zero) and press Enter.
Chapter 5: Using the Console Menu 87