Table of Contents
Advertisement
Refresh the event
log
Clear the event log
Hardware log
298
SAN32M-1 Installation and Service Manual
— SFP - Small form factor pluggable (SFP) optical transceiver.
Chassis slots for SFPs inserted in a port are 0 through 31. SFPs
are FRUs.
— PWR - power supply. Chassis slots for redundant power
supplies are 0 and 1. Power supplies are FRUs.
— FAN - cooling fan. Chassis slots for redundant fans are 0
through 3. Fans are FRUs.
— CTP - control processor (CTP) card. The chassis slot is 0. The
CTP card is not a FRU.
— THM - thermal sensor. The chassis slot is 0. The thermal
sensor is not a FRU.
•
Event Data - up to 32 bytes of supplementary event data (if
available for the event) in hexadecimal format. Refer to
,
"Event code
tables"for an explanation of the supplementary event
data.
To ensure recently-created events appear in the Event Log,
periodically refresh the log display. This is particularly important
when inspecting the log for informational event codes to verify a
repair procedure. To refresh the log, click Refresh at the bottom of the
log window.
To ensure the Event Log is up-to-date and not filled with archived
events, periodically clear the log display. To clear the log, click Clear
at the bottom of the log window.
The Hardware Log
(Figure
and replacements (insertions) for the switch. The information is
useful to maintenance personnel for fault isolation and repair
verification
163) displays a history of FRU removals
Appendix
Advertisement
Table of Contents
