IBM TotalStorage SAN32M-1 Installation And Service Manual page 410

Message
Description
Action
Message
Description
Action
Message
Description
Action
Message
Description
Action
Message
Description
Action
378
SAN32M-1 Installation and Service Manual
Cannot run diagnostics while a device is logged-in to the port.
A device is logged in to the port where a diagnostic test is attempted.
Log out the device and run the diagnostic test again.
Cannot run diagnostics. The port is not installed.
Port diagnostics cannot be performed when the port is not installed.
Run diagnostics only on a port that is installed.
Cannot save IPL configuration file while active=saved is enabled.
The user cannot save the IPL file while the active=save property is
set.
The FICON management server property, active=save, must be
disabled for EFCM to save the IPL file.
Cannot save port configuration.
Port configuration cannot be saved. The link is down or busy.
Retry the operation later. If the condition persists, contact support
personnel.
Cannot save SNMP configuration.
SNMP configuration cannot be saved. The link is down or busy.
Retry the operation later. If the condition persists, contact support
personnel.