Table of Contents
Advertisement
Event Code: 585
Message:
Primitive sequence timeout
Severity:
Major
Explanation:
The incident node has recognized either a Link-Reset-Protocol (LR) timeout (see FC-PH clauses 16.5.2.1 and
16.5.2.3) or a timeout when timing for the appropriate response while in NOS Receive state and after NOS is no
longer recognized (see FC-PH clause 16.5.3.2).
Action:
A link-incident record (LIR) is generated and sent to the host using the link-incident reporting procedure defined
in the T11/99-017v0 document. If, after fault isolation is performed by the host, it is determined that the incident is
because of a port failure, perform a data collection procedure for this switch using the EFC Manager, and return
the CD to IBM for analysis.
Event Data:
Byte 0 = Port number (00-8F)
Bytes 4-7 = Elapsed millisecond tick count
Bytes 8-11 = Port state indicators
0x00 = Active
0x01 = OLIB
0x05 = LR1
0x06 = LR2
0x07 = LR3
0x09 = LF2
0x0A = LF1
0x0C = OL1A
0x0D = OL1C
0x0E = OL2
0x0F = OL3
Distribution:
Switch
Nonvolatile
System
Event Log
System
Event Log
Error
Indicator
EFC Server
E-Mail
Call-Home
Appendix B: Event code tables
Host
Sense Info
Link Incident
471
Advertisement
Table of Contents
