Table of Contents
Advertisement
Add a firmware version
338
SAN32M-1 Installation and Service Manual
1. At the EFC Server, open the EFC Manager application. The
Product View displays.
2. Select the icon representing the switch to be inspected for
firmware version. The Hardware View for the selected switch
displays.
3. At the navigation control panel, select Firmware Library from the
Maintenance menu. The Firmware Library dialog box displays.
4. The firmware version displays at the lower left corner of the
dialog box in XX.YY.ZZ format, where XX is the version level, YY
is the release level, and ZZ is the patch level.
5. Click Close to return to the Hardware View.
The firmware version shipped with the switch is provided on the
System Version XX.YY.ZZ diskette. Subsequent firmware versions for
upgrading the switch are provided to customers from IBM.
NOTE: When adding a firmware version, follow all the instructions in the
release notes or engineering change (EC) instructions that accompany the
firmware version. This information supplements information in this general
procedure.
To add a switch firmware version to the library stored on the EFC
Server hard drive:
1. Obtain the new firmware version online:
a. At the EFC Server or other personal computer (PC) with
internet access, go to the support page.
Advertisement
Table of Contents
