Table of Contents
Advertisement
Task 10: Set management server date and time
94
SAN32M-1 Installation and Service Manual
3. Based on the level of access to be changed, select the Standard user,
Restricted user, or Other radio button. If the Other radio button is
selected, choose the type of access from the adjacent list box.
4. Click OK. The new user information is added and the
EFCSERVER\srvacc Properties dialog box closes. Record the user
information for reference if the management server hard drive
fails and must be restored.
5. If no other users are to be changed, click OK to close the Users and
Passwords dialog box.
6. Click close (X) at the upper right corner of the Control Panel
window to return to the Windows 2000 desktop.
The SAN Management application's audit and event logs are
stamped with the date and time from the management server. The
switch's system clock is synchronized with date and time of the
management server by default. To set the server date and time:
1. At the Windows 2000 desktop, click Start, then select Settings,
then Control Panel. The Control Panel window displays.
2. At the Control Panel window, double-click the Date/Time icon. The
Date/Time Properties dialog box displays with the Date & Time
page open.
NOTE: The Time Zone field must be set before the Date & Time field.
Advertisement
Table of Contents
