Table of Contents
Advertisement
Event Code: 073
Message:
Fabric Init Error
Severity:
Informational
Explanation:
There was an error detected in the fabric initialization sequence. Most problems are caused by frame delivery
errors. The Event data is intended for engineering evaluation of the problem. It includes a reason code and if
applicable, a list of ports that problems were detected over.
Action:
Perform a data collection operation and contact a service representative.
Event Data:
Byte 0: The error Reason Code.
01 = Error no notification for principal switch. Not principal switch and never receives AAI (DIA) from
02 = Error domain ID not assigned. Not principal switch and got no response to RDI. Unable to
03 = Fabric initializion completed and discover neighbor switches not in local domain ID list. After the
04-FF = Reserved.
Distribution:
Switch
Nonvolatile
System
Event Log
418
SAN32M-1 Installation and Service Manual
the principal switch
allocate a domain ID.
fabric init sequence completes, directly connected switches are not included in the local domain
id list..
System
Event Log
Error
Indicator
EFC Server
E-Mail
Call-Home
Host
Sense Info
Link Incident
Advertisement
Table of Contents
