Table of Contents
Advertisement
Periodically synchronize date and time
Figure 75
Task 19: Configure SAN32M-1 Element Manager applications
126
SAN32M-1 Installation and Service Manual
To set the switch to periodically synchronize date and time with the
SAN management application:
1. Click the Periodic Date/Time Synchronization check box to select the
option (check mark in the box). The Date and Time fields are
greyed out and not selectable. Perform one of the following
options:
— Click Activate to enable synchronization and close the
Configure Date and Time dialog box. The switch date and time
synchronize with the SAN management application date and
time at the next update period (at least once daily).
— Click Sync Now to synchronize the switch and SAN
management application immediately. The Date and Time
Synced dialog box displays.
Date and Time Synced Dialog Box
2. Click OK to synchronize the date and time and close the Date and
Time Synced dialog box, then click Activate to enable
synchronization and close the Configure Date and Time dialog box.
Selectively perform the following configuration tasks for the
SAN32M-1 switch element manager application according to the
customer's installation requirements. For additional information,
refer to the McDATA Element Manager Switch User Manual.
•
Identify the switch to the SAN management application.
Configure switch management style (open systems or FICON).
•
Configure switch management style (open systems or FICON).
•
Configure switch operating parameters.
•
Configure switch and fabric operating parameters.
Advertisement
Table of Contents
