Table of Contents
Advertisement
Port operational states and actions (EFCM Basic)
Table 12
Operational State
Action
Offline
Go to
Not Operational
Go to
Port Failure
Go to
Testing
Internal or external loopback test in process. Exit MAP.
Invalid Attachment
Go to
Link Reset
Go to
Not Installed
Go to
12
Install an SFP optical transceiver in the port receptacle. Refer to
RRP: SFP transceiver
on page 354.
•
This procedure is concurrent and can be performed while the
switch is powered on and operational.
•
Verify location of the failed port.
•
Perform an external loopback test for the port as part of FRU
removal and replacement. Refer to
page 319.
Exit MAP.
13
At the EFC Server, does a blinking red and yellow diamond
(failed FRU indicator) appear adjacent to a Fibre Channel port graphic
at the Hardware View?
NO
YES
↓
A port failure is indicated. Go to
14
Did a Fibre Channel port fail a loopback test?
NO
YES
↓
Go to
step
18.
step
19.
step
19.
step
6.
step
22.
step
33.
step
12.
Perform loopback tests
step
6.
Chapter 3: Diagnostics
on
251
Advertisement
Table of Contents
