IBM TotalStorage SAN32M-1 Installation And Service Manual page 406

Action
Message
Description
Action
Message
Description
Action
Message
Description
Action
374
SAN32M-1 Installation and Service Manual
Replace FRU and enable beaconing again or enable beaconing on
operating FRU.
Cannot enable beaconing while the system error light is on.
Beaconing cannot be enabled while the system error light is on.
Select Clear System Error Light from Product menu to clear error light,
then enable beaconing.
Cannot enable Open Trunking while Enterprise Fabric Mode is
active and the switch is offline.
Enterprise Fabric mode is active and the switch or director is online
and user is attempting to enable Open Trunking. This message only
displays if the optional Open Trunking feature is installed.
Perform either of the following steps:
Disable Enterprise Fabric Mode option by selecting the appropriate
fabric in the Fabric Tree portion of the EFC Manager window (Fabrics
tab) and then selecting Enterprise Fabric Mode from the Fabrics menu.
When the Enterprise Fabric Mode dialog box displays, click Start and
follow prompts to disable the feature.
Set the switch or director offline through the Set Online State dialog
box. Display this dialog box by selecting Set Online State from the
Element Manager Maintenance menu.
Cannot have E_Ports in FICON mode unless SANtegrity feature is
installed. Please contact your sales representative.
User attempted to change management stylefrom Open Systems to
FICON style with E_Ports ports configured, but SANtegrity Binding
is not installed.
Informational message. If you install SANtegrity Binding before
changing to FICON mode, then E_Ports will remain as E_Ports when
you change to FICON mode. If SANtegrity Binding is not installed,
setting a switch to FICON mode will change all E_ports to G_Ports.