Table of Contents
Advertisement
350
SAN32M-1 Installation and Service Manual
c. Type a member name and password (both are case sensitive)
and click Sign In. The McDATA Central Site File Library page
displays.
If required, obtain the customer-specific member name and
password from the customer or next level of support.
d. Click the Microcode Downloads folder. A list of software
available for download displays at the right side of the
window.
NOTE: If required, obtain the customer-specific member name and
password from the customer or next level of support.
e. Click the appropriate EFCM Server Version XX.YY.ZZ entry,
where XX.YY.ZZ is the desired version. A File Download dialog
box appears.
f. Select Save this file to disk and click OK. The Save As dialog box
appears.
g. Ensure the correct directory path is specified in the Save In
field at the Save as dialog box, and the correct file is specified
in the File name field. Click Save.
h. When the process completes, click Close to close the dialog
box. The new software version executable file is downloaded
and saved to the EFC Server or PC hard drive.
i. If the executable file was downloaded to a PC (not the EFC
Server), transfer the firmware version file to the EFC Server by
diskette or other electronic means.
j. Go to
step
5.
4. Insert the EFC Management Applications CD-ROM into the
CD-ROM drive of the service processor.
5. At the EFC Server, click the Windows Start button. The Windows
2000 Workstation menu displays.
6. At the Windows 2000 Workstation menu, select Run. The Run
dialog box appears.
Advertisement
Table of Contents
