Table of Contents
Advertisement
Figure 101
164
SAN32M-1 Installation and Service Manual
Network View
a. At the IP Address field, type the new value as specified by the
network administrator (default is 10.1.1.10).
b. At the Subnet Mask field, type the new value as specified by
the network administrator (default is 255.0.0.0).
c. At the Gateway Address field, type the new value as specified
by the network administrator (default is 0.0.0.0).
2. Click OK to save and activate changes. An acknowledgement
message displays, indicating the browser PC must be directed to
the new IP address.
3. Update the address resolution protocol (ARP) table for the
browser PC.
a. Close the EFCM Basic Edition interface and all browser
applications.
b. At the Windows desktop, click Start at the left side of the task
bar. The Windows Workstation menu displays.
c. At the Windows Workstation menu, sequentially select the
Programs and Command Prompt options. A disk operating
system (DOS) window displays.
d. Delete the switch's old IP address from the ARP table. At the
command (C:\) prompt, type arp -d xxx.xxx.xxx.xxx, where
xxx.xxx.xxx.xxx is the old IP address for the switch.
Advertisement
Table of Contents
