Table of Contents
Advertisement
Configure switch identification
Figure 76
•
Configure switch binding.
•
Configure switch ports.
•
Configure logical port addresses (FICON Management Style
only).
•
Configure SNMP trap message recipients.
•
Configure threshold alerts.
•
Configure OpenTrunking.
•
Configure and enable e-mail notification.
•
Configure and enable call-home event notification.
Perform this procedure to configure the switch name, description,
location, and contact person for the SAN management application.
The information appears in multiple dialog boxes throughout the
application. In addition, the Name, Location, and Contact variables
configured at the Configure Identification dialog box correspond
respectively to the SNMP variables sysName, sysLocation, and
sysContact. These variables are used by SNMP management
workstations when obtaining data from managed switches.
To configure the switch identification:
1. At the Hardware View for the selected switch, click the Configure
icon at the navigation control panel and select Identification from
the Configure menu. The Configure Identification dialog box
displays.
Configure identification dialog box
Chapter 2: Installation tasks
127
Advertisement
Table of Contents
