Table of Contents
Advertisement
Description
Action
Message
Description
Action
Message
Description
Action
Message
Description
Action
Message
Description
Action
402
SAN32M-1 Installation and Service Manual
User attempted to disable these parameters in the Configure Switch
Parameters dialog box with the switch online and Enterprise Fabric
Mode (SANtegrity binding feature) enabled.
Disable Enterprise Fabric Mode through the Enterprise Fabric Mode
dialog box in the EFC Manager, then disable the parameters.
The IPL configuration cannot be deleted.
A user attempted attempted to delete the IPL address configuration.
This operation was not allowed.
Cancel the operation.
The link to the switch is not available.
The link from the EFC Server to the switch is not available.
Check Ethernet connection.
The maximum number of address configurations has been reached.
The maximum number of saved address configurations has been
reached.
Delete configurations no longer needed to allow new configuration to
be saved.
The optical transceiver is not installed.
No information available for a port that is not installed.
Ensure the optical transceiver is installed and fully seated.
Advertisement
Table of Contents
