Table of Contents
Advertisement
Field-replaceable units
18
SAN32M-1 Installation and Service Manual
•
Desktop or notebook PC with color monitor, keyboard, and
mouse, using an Intel Pentium processor with a 400 MHz or
greater clock speed, and using the Microsoft Windows 95,
Windows 98, Windows 2000, Windows XP, Windows NT 4.0, or
Linux 2.2 operating system.
•
Unix workstation with color monitor, keyboard, and mouse,
using a:
— Hewlett-Packard
greater clock speed, using the HP-UX
system.
®
— Sun
Microsystems UltraSPARC™ II processor with a 400
MHz or greater clock speed, using the SunOS™ Version 5.5.1
or higher operating system, or Solaris™ Version 2.5.1 or higher
operating system.
®
— IBM PowerPC
clock speed, or POWER3™ microprocessor with a 400 MHz or
greater clock speed, using the AIX Version 4.3.3 or higher
operating system.
•
At least 15 MB available on the internal hard drive.
•
128 MB or greater RAM.
•
Video card supporting 256 colors at 800 x 600 pixel resolution.
•
Ethernet network adapter.
•
Java-enabled Internet browser, such as Microsoft Internet
Explorer (Version 4.0 or later) or Netscape Navigator (Version 4.6
or later).
The switch provides a modular design that enables quick removal
and replacement of FRUs (small form factor pluggable SFP)) optical
transceivers, power supplies, and fans).
of the switch. SFPs installed in the ports are the only FRUs accessed
from the front. The switch front panel also includes:
•
An initial machine load (IML) button.
•
An Ethernet LAN connector.
•
Green power (PWR) and amber system error (ERR) LEDs.
®
®
HA PA-RISC
processor with a 400 MHz or
®
microprocessor with a 400 MHz or greater
Figure 5
11 or higher operating
illustrates the front
Advertisement
Table of Contents
