Table of Contents
Advertisement
Safety and environmental notices
Safety notices and labels
Danger notices
xxii
SAN32M-1 Installation and Service Manual
When you send information to IBM, you grant IBM a nonexclusive
right to use or distribute the information in any way it believes
appropriate without incurring any obligation to you.
ATTENTION ! The IBM Total Storage SAN32M-1 is not designed to be
installed and serviced by customers. Installation and servicing of the
SAN32M-1 should be performed by qualified service representatives only.
When using this product, observe the danger, caution, and attention
notices contained in this guide. The notices are accompanied by
symbols that represent the severity of the safety condition. The
danger and caution notices are listed in numerical order based on
their IDs, which are displayed in parentheses, for example (D004), at
the end of each notice. Use this ID to locate the translations of these
danger and caution notices in the IBM eServer Safety Notices
(G229-9054) publication, which is on the CD-ROM that accompanies
this product.
The following notices and statements are used in this document.
They are listed below in order of increasing severity of potential
hazards. Follow the links for more detailed descriptions and
examples of the danger, caution, and attention notices in the sections
that follow.
•
Note: These notices provide important tips, guidance, or advice.
•
Attention notices: These notices indicate potential damage to
programs, devices, or data.
•
Caution notices: These statements indicate situations that can be
potentially hazardous to you.
•
Danger notices: These statements indicate situations that can be
potentially lethal or extremely hazardous to you. Safety labels are
also attached directly to products to warn of these situations.
A danger notice calls attention to a situation that is potentially lethal
or extremely hazardous to people. A lightning bolt symbol
accompanies a danger notice to represent a dangerous electrical
Advertisement
Table of Contents
