Table of Contents
Advertisement
Figure 51
Change user properties
92
SAN32M-1 Installation and Service Manual
Add new user wizard (third window)
4. Based on the level of access to be granted, select the Standard user,
Restricted user, or Other radio button. If the Other radio button is
selected, choose the type of access from the adjacent list box.
5. Click Finish. The new user information is added and the wizard
closes. Record the user information for reference if the
management server hard drive fails and must be restored.
6. If no other users are to be added, click OK to close the Users and
Passwords dialog box.
7. Click close (X) at the upper right corner of the Control Panel
window to return to the Windows 2000 desktop.
To change an existing user's properties:
1. At the Users and Passwords dialog box, highlight the user
(srvacc, for example) at the Users for this computer field and click
Properties. The EFCSERVER\srvacc Properties dialog box displays
with the General tab selected
(Figure 52
on page 93).
Advertisement
Table of Contents
